I first started this hobby way back 23 years ago and for the past 15 years I have been changing multiple turntables through out the period. A total of 9 consists of Michell Gyrodec, Thorens TD124MKII, Clearaudio Champion and Roksan to name a few. Between all these, the Thorens TD124MKII has given me the sweetness in musicality and Clearaudio with its precision with soul in musicality.
In early 2013, I acquired NOS Lenco L75 with an upgraded multilayer plinth. After replacing the v block from Desmos, which is a must thing to do after getting a Lenco. The V blocks are made from rubber like silicone and you will not getting correct azimuth as the worn out blocks doesn't wears out symmetrically. I put on the first record and I was immediately struck by its tone, musicality and sweetness. In 2001, 2002 or even 2003 the price of L75 was a paltry RM400-500 and they were easily available and nobody wants it because of being vintage, old and its look. For the past one and a half years I was listening to L75 multilayer plinth with no complaint, it just great.
 |
| Lenco arm completely not in service as the rega came in and removed all the accessories for rega clearance. |
While having the stock Lenco tonearm, I have added another tonearm, the Rega as my plinth can accommodate with 2 tonearms. The Rega is a better tracker compared to original Lenco tonearm, hands down and I wasn't stop there when I read about PTP project from LencoHeaven. A Lenco community forum which actively discussing about Lenco on how to bring out the best of its capability. Peter, the designer of the top plate for PTP is very friendly in answering questions. I ordered the plate package from him in Europe and the plinth need to be changed for sure as the design of the PTP is well out of Lenco's traditional look.
Why the plinth must be upgraded?....I let the pro answer for you and here it is...
The Lenco doesn't need a plinth in order to be Great, it is inherently
Great. The plinth just brings it to a higher level. If you were to buy a
Lenco, replace the rubber V-blocks with new ones, solder a better
tonearm cable to the tags, put in some new oil for the bearing, apply
some Dynamat here and there, and buy a Denon DL-103 which LOVES the
high-mass Lenco tonearm, you would have several thousands of dollars
worth of performance (and in terms of bass, dynamics and PRaT simply
world class) for very little money. The trick with the original Lenco
plinth is simply to defeat the suspension: remove the springs, torque
down the Lenco to its own plinth via the provided screws, remove the
bottom entirely as so many do with these "hollow-box" designs (like the
Thorens and LP12s) and mount the corners up on rubber feet or Tiptoes.
If you are fortunate and can find one, the Decca International tonearm
fits with precise geometry into the tonearm-hole of both the Lenco L75
and L78.
I once restored a Lenco in original plinth and fitted it with a Decca
International and Grado Platinum for a fellow who had an Acoustic
Signature Final Tool turntable with a SME 309/Benz Micro Ruby, and he
MUCH preferred the Lenco/Decca/Platinum. He sold the Acoustic with no
regrets, to put it mildly. Another fellow set up a Rega tonearm in the
original hole despite improper geometry and VTA (as I did for a long
while), set it up on bricks with no plinth whatsoever, and reported this
combo easily beat his maxed-out Linn LP12. A friend of mine still,
after 6 years, uses a Lenco with Rega RB-300 mounted in original hole,
his system sounds glorious: true speed stability goes a looonnng way to
reducing mistracking. Check under my "system" under my name on Audiogon
to see the "Oak Lenco", which shows this set-up.
Once the suspension is defeated, then a stable platform does a lot to
further improve the sound.
Johnnantais (System | Threads | Answers | This Thread)
The above text copied from Audiogon forum and John Nantais is one of the well known Lenco's guru.
From the above statement, even though he said that the Lenco doesn't need a plinth but he does mentioned that a plinth will brings it to a higher level. In this case the better the plinth, the higher the improvement and who want to use a naked Lenco without a plinth...so why not make the best. A good solid plinth, free from vibrations is a must.
From the above statement, even though he said that the Lenco doesn't need a plinth but he does mentioned that a plinth will brings it to a higher level. In this case the better the plinth, the higher the improvement and who want to use a naked Lenco without a plinth...so why not make the best. A good solid plinth, free from vibrations is a must.
Remove the springs, direct coupling to the solid plinth, so that the platter and top plate will benefit from vibration free body and its mass.
Original L75's top plate has four point suspension spring and it has been improved with newer model L78 which using viscosity suspension spring. More solid and reliable springs in L78 has been a good effect in reducing top plate's vibration, ringing etc. This is due to the fact that the L75 using 2mm top plate with heavy platter. The improvement in L78 however still using the 2mm top plate but with better springs and it does not completely solved the problem, the top plate need to be rigid to withstand the torque of the motor and heavy platter. Hence, the resurrection of Lenco with multilayer plinth makes a huge success. The top plate are in contact with the plinth directly to benefits the heavy multilayer body mass. The platter spins with better speed stability and one thing to remember that the spring not only moves up and down, but it does sway when the motor/idler wheel is engaged. You wont notice, but there is.
and why PTP?...
and why PTP?...
How's the sound?...
Previously on L75/multilayer/RB300 I have no complaint and thought that's the best a Lenco can go. Not until I tried the PTP method...the whole presentation has changed with solid, agile, pronounce bassline. Highs that flow freely with no restriction and the separation of instruments were much better than before. Due to properly isolated motor and spindle on different plate, detail retrieval is great and it sound huge. You never know until you tried and you never know that something "new" in the recording until you listen to it.
All the upgrades, installations was done by friend of mine, Az Rekod. Please take note the multilayer plinth is not a normal, ordinary stacking of plywood. It was a tedious one month job for a proper contact with special adhesive property.
All the upgrades, installations was done by friend of mine, Az Rekod. Please take note the multilayer plinth is not a normal, ordinary stacking of plywood. It was a tedious one month job for a proper contact with special adhesive property.
 |
| Lovely |
